2022 Land Pride RC2512 Base

2022 Land Pride RC2512 Base

Swipe to View More

  • Year 2022
  • Make Land Pride
  • Model RC2512
2022 Land Pride RC2512 Base

2022 Land Pride RC2512 Base

2022 Land Pride RC2512

Land Pride's RC2512 Rotary Cutter is designed for smaller tractors while retaining the features and benefits of larger folding cutters. The 12' width, sharp turning radius, and low tongue weight makes this an ideal Rotary Cutter for compact tractor owners that need a large rotary cutter for light agricultural and municipal grass maintenance. The RC2512 offers a pull-type, self-leveling tongue with a clevis hitch for attachment to 40-100 HP tractors. It features a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection. The standard stump jumper under each blade spindle slides over stumps, rocks and debris. Front and rear single chain safety guards provide protection against thrown objects. (RC2515 Photo shown for reference.)

Features may include:

GEARBOX WARRANTY
  • 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
NARROW TONGUE DESIGN
  • Narrow tongue design handles tight turns - great size for country estates.
LED SIGNAL LIGHTS
  • LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
10 GAUGE STUMP JUMPER
  • Round stump jumper allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.
DUAL LEVELING RODS
  • Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.
1-1/2" CUTTING CAPACITY
  • These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.
ADJUSTABLE JACK ANGLE
  • Helps keep park jack vertical when in use.
BEVELED SKID SHOES
  • Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.
CENTER SPRING
  • Center spring on the cylinder cushions load on drawbar.

Engine

Engine Power Tractor horsepower: 40-100 hp (30-75 kW)
Lubrication Gearbox: Splitter: 80-90W EP | Center & wings: 80-90W EP

Drivetrain

Gearbox Input shaft: 1 3/8" (3.5 cm) 6 Spline | Output shaft: 1 1/2" (3.8 cm)
Driveline Input: Category 4 with constant velocity u-joint | Intermediate & wing drivelines: Category 3 with slip-clutch

Wheels & Tires

Wheels 20.5" x 6.75" x 10" (52.1 cm x 17.1 cm x 25.4 cm) used aircraft tires or 21" (53.3 cm) laminated | Number of wheels: 4 - Wheels: 2 on transport axle and one on each wing axle

Operational

Operating Speed Blade tip speed At 540 rpm: Center Blades = 16,500 FPM (83.8 mps) / Wing Blades = 16,000 FPM (81.3 mps)

Chassis

Hitch/Type LP Performance hitch and swivel hitch
Deck Thickness 10 Gauge (3.4 mm)

Lights and Safety

Lighting Signal lights 7 Pin connector: LED SAE J560 pin configuration

Dimensions

Dimensions Cutting capacity: 1 1/2" (3.8 cm) | Lift hydraulics: 2 1/2" bore x 8" stroke hydraulic cylinder, hoses, fittings and stroke control spacers | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground. | Side skirt material: 3/16" (5 mm) Plate | Blades - 6 (2 per deck): 1/2" x 3" (1.3 cm x 7.6 cm) | Blade overlap: 6" (15.2 cm) | Stump jumper / blade holder: 10 Gauge (3.4 mm) round dish shaped pan, reinforced with 1" x 3 1/2" (2.5 cm x 8.9 cm) blade bar
Cutting Width 12'-0" (3.66 m)
Overall Width cutter: 12'-7" (3.84 m)
Transport Width Minimum: 7'-11" (2.41 m) With front cutting blade 1 1/2" (3.8 cm) off the ground.
Overall Length 13'-3" (4.04 m)
Deck Height 11" (27.9 cm)
Height Cutting: 1 1/2" to 12" (3.8 cm to 30.5 cm)
Bore 2"
Stroke 8"

Capacities

Oil capacity Splitter: 4.5 pints (2.13 L | Center & wings: 4 pints (1.89 L)
Features Hitch jack: 907.2 kg (2,000 lbs)

Weights

Weight Hitch: 793 lbs (359.7 kg) | Machine: 2,540 lbs (1152.1 kg)

Features

Features Wing folding hydraulics: stroke hydraulic cylinders, hoses, and fittings | Skid shoes: Wing deck: 1 replaceable per wing / Center deck: 2 replaceable shoes | Blade rotation: Left wing: Counterclockwise / Center deck: Counterclockwise / Right wing: Clockwise | Blade bolt: Keyed with hardened flat washer and locknut | Front & rear guards: Single chain | Transport axle Spring-cushioned lift cylinder:
Construction Material Blades - 6 (2 per deck): Heat treated free swinging alloy Steel with up lift
Protection Plan Wing transport: Wing transport locks
Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.

Product Photography